Description
- All-digital Transceiver
- Compatible with DigiBee and Einstein flash units ONLY
- Can be used with the CyberSync™ Trigger Transmitter (CST2)
- NOT compatible with AlienBees or White Lightning flash units
PRODUCT INFORMATION
The CyberSync™ Transceiver is designed for use with DigiBee and Einstein™ flash units. The transceiver fits into the receptacle located on each flash unit. This forms an all-digital interface between the flash unit and the CyberSync™ Trigger Transmitter 2 (CST2), the discontinued CST, and/or the Cyber Commander™. The Transceiver is powered by the flash unit that it is connected to with the frequency and channel selection being made on the back panel of the flash unit.
SPECIFICATIONS
Dimensions
1 in (width) × 2.75 in (height) × 0.375 in (depth)
System Frequency Range
16 frequencies spaced 2 MHz apart
Operating range: 2.427 GHz to 2.457 GHz
System Encoding
Secure 256-bit binary encoded packet
Includes validity verification
System Latency
Typical delay: 1/4000 sec from camera contact closure to receiver sync output
Sync Voltage
Supports up to 300 VDC from a connected flash unit
CyberSync Transceiver
- 1x Paul C. Buff Cyber Sync Transceiver
- 1x Rubber pin cover, attached
- 1x CyberSync Transceiver Quick Start Product Manual
- 2-Year Factory Warranty
