REMOTE CONTROLS
- Paul C. Buff Europe
- 8 hours ago
- 1 min read
MY CYBERSYNC SYSTEM IS MISFIRING, WHAT CAN I DO?
First try swapping both the CyberSync™ Trigger Transmitter or Cyber Commander™ and all receivers to a new frequency than the one you are currently using to rule out interference. If that does not work, try new batteries on all the components that require them.
WHAT IS THE X-SYNC SPEED OF THE CYBERSYNC SYSTEM?
The x-sync speed is determined by the camera and radio tripper (in the case of the CyberSync™ system, either the Cyber Commander™ or CyberSync Trigger Transmitter). The delay time of the CyberSync™ system is 1/4000 second. It can sync up to 1/2500 second on capable cameras and flash units. Most modern DSLR cameras max around 1/160 - 1/250 second, either with a sync cord or with a CyberSync™ component.
THE RED LED ON THE CYBERSYNC TRIGGER TRANSMITTER IS FLASHING MULTIPLE TIMES WEHN USED?
This flashing red LED indicates that the battery is low or has a weak connection. You will need to replace the battery.
Comments